Magnum Energy ME-RC Manuel du propriétaire télécharger pdf (Page 42)

5.0 Operation

5.1.3 ON/OFF Pushbuttons

• ON/OFF INVERTER – This button toggles the inverter function on and

off. The green INV LED turns on and off with the button.

• ON/OFF CHARGER – This button toggles the charger function on and

off whenever the charger is actively charging. The green CHG LED turns

on and off with the button. This button is also used to initiate an Equalize

charge. For more information on using the Equalize charge feature, see

Section 5.2.2 and the Equalizing mode information on page 40.

5.1.4 Menu Buttons

These ﬁ ve buttons provide quick access to menu items that can help with

conﬁ guring, monitoring and troubleshooting your inverter/charger system.

• SHORE – This button allows you to set the appropriate breaker size for

the incoming utility/shore power and is used to control the amount of

AC amps the battery charger uses from the HOT 1 IN input. See Section

3.3.1 for more detailed information.

• AGS – This button allows the networked Auto Generator Start (ME-

AGS-N) controller to be conﬁ gured to speciﬁ c system preferences and

enables you to check the AGS’s status (when connected). Refer to

Section 7.0 for detailed information on this menu.

• METER – This button provides meter information on the inverter/

charger system. See Section 3.3.3 for more detailed information.

• SETUP – This button allows the inverter/charger to be conﬁ gured to

your speciﬁ c system preferences. See Section 3.3.4 for more detailed

information.

• TECH – This button allows you to access menu selections that can help

service personnel with troubleshooting and also allows the factory default

setting to be restored. See Section 3.3.5 for more detailed information.

5.1.5 Rotary SELECT Knob

The rotary SELECT knob is similar to a car dash radio knob, and is used to

view and select various menu items and settings displayed on the LCD screen.

Turn the rotary knob clockwise and counterclockwise to view the different

menu items and available settings. Press the SELECT knob to select/enter a

menu item or to save a setting once it is displayed on the LCD screen. Press

and hold the SELECT knob for 10 seconds to refresh the LCD display.

Info: All adjustable inverter/charger settings in the ME-RC (except

for the 08 Screen Setup settings—which revert back to default)

are saved in nonvolatile memory. These adjustable settings are

preserved until changed, even if an inverter reset is performed or

power to the remote or inverter is removed.

CAUTION: An accessory that is networked to the inverter may

have adjustable settings that revert back to default if all power to

the inverter is lost. Refer to the owner’s manual for the particular

accessory to determine if any setting is affected.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 83 84

Commentaires sur ces manuels

Pas de commentaire

Magnum Energy ME-RC Manuel du propriétaire Page 42

Commentaires sur ces manuels