Magnum Energy ME-RC Manuel du propriétaire télécharger pdf (Page 35)

3.0 Setup

TECH

Press

Status...

05 Ext Control

Rotate to

Press to select

Rotate to

desired

display:

Status...

Shore Max: EXT

Status...

VAC Dropout: INT

Status...

Charge Rate: INT

Figure 3-18, TECH: 05 Ext Control Display

• TECH: 06 SETUP PIN – This menu sets the password (PIN – Personal

Identiﬁ cation Number) and locks/unlocks the ME-RC’s SETUP button

menus (as well as the TECH button’s 04 Load Defaults menu).

Why should I use the PIN feature? This feature is useful when the

operation of the inverter has been set up by an experienced user or installer.

Restricting access to menus with a password can avoid unauthorized changes

to your settings by inexperienced users.

Setting a PIN

If a PIN has not been set, the SETUP menus are accessible. When you first

enter (press SELECT) the SETUP PIN menu, “PIN = 0000” displays with the

first “0” blinking. “0000” is the default setting when no PIN has been set.

From the PIN = 0000 menu:

1. Rotate the SELECT knob to the desired number (0-9), and then press

SELECT.

2. Repeat Step 1 to set the remaining three digits until the desired PIN

number displays.

3. After pressing the SELECT knob for the last digit, the PIN is set. The

Unlock SETUP menu displays. Rotate the SELECT knob to view the Lock

SETUP and Change PIN menus.

• TECH: 05 Ext Control – Magnum has an open protocol policy that allows

certain functions (VAC Dropout, Charge Rate, or Shore Max settings) of

the inverter/charger to be controlled externally—such as with a third

party communications device.

INT: the setting has not changed, even if an external device is in control.

EXT: an external device is controlling the setting—and, the external

device has changed the setting.

Figure 3-19, Example: Ext Control Scrolling Screens

Example: When an external device is connected and is changing one of the

controllable functions, the text will change from “INT” to “EXT” to denote that

particular function is being changed. In the example as shown in Figure 3-19

below, the

VAC Dropout and Charge Rate settings are not being changed,

but the Shore Max setting is being changed by the external device.

Status...

Shore Max: EXT

Status...

VAC Dropout: INT

Status...

Charge Rate: INT

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 83 84

Commentaires sur ces manuels

Pas de commentaire

Magnum Energy ME-RC Manuel du propriétaire Page 35

Commentaires sur ces manuels