Magnum Energy ME-RC Manuel du propriétaire télécharger pdf (Page 9)

2.0 Installation

Review this section and the Important Product Safety Instructions on page ii

before proceeding with the installation of your remote.

WARNING: Installations should be performed by qualiﬁ ed per-

sonnel, such as a licensed or certiﬁ ed electrician. The installer

determines which safety codes apply and ensures all applicable

installation requirements are followed. Applicable installation codes

vary depending on the speciﬁ c location and application.

CAUTION: When connecting battery power to the inverter, all

battery negative connections must be connected prior to the bat-

tery positive connections. When removing battery power from the

inverter, the battery positive should be removed before any battery

negative connections are disconnected. This prevents any com-

munication chips/lines from becoming the DC return path to the

battery—causing permanent damage to all connected accessories.

Summation: Ensure all battery negative circuits are always con-

nected before connecting or disconnecting battery positive.

2.1 Pre-Installation

Before proceeding, read the entire Installation section to determine how best

to install your ME-RC remote. The more thorough you plan in the beginning,

the better your inverter needs will be met.

2.1.1 Installation Guidelines

• Before connecting any wires, determine the remote’s cable route through-

out the home or vehicle/boat, both to and from the inverter.

• Always check for existing electrical, plumbing, or other areas of potential

damage BEFORE drilling or cutting into walls to mount the remote.

• Make sure all wires have a smooth bend radius and do not become kinked.

• If installing this remote in a boat, RV, or truck ensure the conductors

passing through walls, bulkheads, or other structural members are pro-

tected. This minimizes insulation damage (such as chaﬁ ng) which can

be caused by vibration or constant rubbing.

2.1.2 Unpacking and Inspection

Carefully remove the ME-RC remote from its shipping container and inspect

all contents. Verify the following items are included:

• The ME-RC remote

• 50’ remote cable

• Four #8 x 3/4 Phillips screws

• ME-RC Owner’s Manual

If items appear to be missing or damaged, contact your authorized Magnum

Energy dealer or Magnum Energy, Inc. Save your proof-of-purchase as a

record of your ownership; it is needed if the unit should require in-warranty

service.

2.1.3 Tools Required

Installing the remote control is simple and requires the following tools:

• Phillips screwdriver • Level • Drill

• Cut-out tool (knife/saw) • Pencil • Drill Bit (7/64”)

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 83 84

Commentaires sur ces manuels

Pas de commentaire

Magnum Energy ME-RC Manuel du propriétaire Page 9

Commentaires sur ces manuels