Magnum Energy ME-RC Manuel du propriétaire télécharger pdf (Page 36)

3.0 Setup

Entering an Existing PIN

When entering a menu (or pressing the SETUP button) the “PIN = 0***”

menu displays. The correct PIN must now be entered in order to access the

menu. If the incorrect PIN number is entered, “Invalid PIN” displays. (No

limit on how many attempts can be made to enter the correct PIN number.)

From the PIN = 0*** menu:

1. Rotate the SELECT knob to the correct digit, and then press SELECT.

2. Repeat Step 1 to enter the remaining three digits of the existing PIN.

3. After pressing the SELECT knob for the last digit, access to the remote/

menu is allowed. Refer to Step 3 in the ‘Setting a PIN’ procedure to lock/

unlock the SETUP button menus.

Info: After the correct PIN has been entered you do not need to

reenter it to access another protected menu, unless five minutes

have passed without any button push.

Changing an Existing PIN

Change your PIN at any time. However, to change an existing PIN, you must

ﬁ rst enter that PIN in order to access the TECH: Change PIN menu item.

From the TECH menu’s PIN = 0*** setting:

1. Use the SELECT knob to enter the existing PIN (see above procedure).

2. Once the existing PIN is entered and you press SELECT for the last digit,

the Unlock SETUP menu appears.

3. Rotate the SELECT knob to the Change PIN menu option, and then press

the SELECT knob. The PIN entry menu appears with the current PIN

displayed and the first PIN digit blinking.

4. Enter the new PIN (see the Setting a PIN procedure on previous page).

Note: “0000” is not a valid PIN.

5. After pressing the SELECT knob for the last digit, the new PIN is set. You

are returned to the PIN setup options menu where you can lock/unlock

the SETUP button menus.

Resetting/Clearing a PIN

You can override a previously entered PIN. When “PIN = 0***” displays,

press and hold the SELECT knob until “PIN = 0000” displays (approximately

7 seconds). Enter a new PIN number as previously described.

Unlock Setup – Press SELECT to allow all users to access the SETUP

button menus.

Lock Setup – Press SELECT to restrict access to the SETUP button

menus to only those users with the valid PIN.

Change PIN – Press SELECT to change the existing PIN.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 83 84

Pas de commentaire

Magnum Energy ME-RC Manuel du propriétaire Page 36