Magnum Energy MS-PAE Series Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Adaptateurs et onduleurs de puissance Magnum Energy MS-PAE Series. MidNite Solar E-Panels Explained Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 7
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
1
MidNite Solar E-Panels Explained
A MidNite Solar E-panel is an AC/DC Disconnect Box that has the Inverter installed on the door of the
E-Panel or above the E-panel. MidNite's E-Panels place the AC and DC breakers in the same
Disconnect Box for a compact solution. MidNite makes E-Panels for Magnum, Outback, Schneider
Conext SW, Schneider XW and SMA Sunny Islands. Each E-Panel contains a battery disconnect
breaker, AC input and output breakers with appropriate bus bars, 120V and 120/240V
configurations, bypass breaker, neutral and ground bus bars, shunt and mounting hardware. All units
have knockouts for surge protection and conduit connections. The E-panels all have spaces for
additional breakers such as for charge controllers and loads.
Magnum Energy 120VAC E-Panels for MS and RD series
Magnum Energy makes a
very interesting line of
inverters, both modified and
pure sine wave. Internal AC
wires are routed to match
the Magnum inverter. The
accessory components like
the DC cover, top shield,
remote bracket and such
are specific to the Magnum
E-Panels. The Magnum has
a PV input plus and DC plus
busbar as well as the
regular AC input and output
busbars.
This chassis is 14.4 inches
wide, so has ample room for
all your wiring needs. The
chassis is only 3.5" deep so wiring access is the best in the industry. All of the present 12 and 24
volt / 120VAC Magnum inverters have a 120VAC inverter/charger input/output as well as a 120VAC
input/output that does not go through the electronics. It is strictly a pass through for the other leg of
a 240VAC input.
The pass through leg can be useful when attempting to utilize both legs of a 240VAC generator. One
leg is used for charging and the other is used to pass through to your 240VAC deep well pump. The
120VAC E-Panel here is not able to handle the extra leg of AC, so look to the 240 E-Panel to
accommodate this unique feature. Normal installations jumper AC 1 & 2 on the inverter for 50 amp
service at 120VAC.
A major advantage of these E-Panels is that they can be tested in the shop to insure that the system
is functioning properly. These E-Panels can be field modified to be right hand units. A right hand door
is required to do this in the field.
Vue de la page 0
1 2 3 4 5 6 7

Résumé du contenu

Page 1

1 MidNite Solar E-Panels Explained A MidNite Solar E-panel is an AC/DC Disconnect Box that has the Inverter installed on the door of the E-Panel or

Page 2 - MNE250XWP-SINGLE

2 The Magnum Energy 240VAC E-Panel for PAE series This is our flagship E-Panel. It accommodates the Magnum Energy MS4448-PAE and MS4024-PAE inverters

Page 3

3 The Conext XWs feature:  Inverter battery breaker  2 separate 60 amp AC inputs for generator and utility  60 amp AC bypass switch  Knockou

Page 4 - MNE250SMA-OG/AC DM

4 The backed up critical loads panel always has 120/240vac available. 60amps is available on leg 1 and 30amps on leg 2 in the critical loads panel. C

Page 5

5 MNE250SMA-OG/AC DM FEATURES:  60amp, 120/240vac Output/Bypass system  Separate 60amp, 120/240vac AC input and output breakers for the master i

Page 6 - MNE250SMA-SLAVE

6  AC conduit connections  Warranty - 5 yrs.  Listed by ETL for US & Canada  Made in the USA MNE250SMA-3PH Master - The MNE250SMA-3PH Ma

Page 7

7  Space provided for 6 additional 1/2" wide din rail mount AC or DC breakers and up to 12 3/4" wide panel mount breakers  Mounting hol

Commentaires sur ces manuels

Pas de commentaire